industrial safety barriers

INDUSTRIAL SAFETY BARRIERS – HOOP BARRIERS ø 60 mm

Standard or reinforced hoop barrier with a discreet but effective presence. Specially designed to protect people and machines
on the shop floor and ideal for warehouse safety. Three lengths: 1000, 1500 or 2000 mm.

Two height: 300 or 1000 mm.
Steel tube: ø 60 mm, 2 mm gauge.
Finish: galvanised steel or zinc primed and finished in our colours Markings: black or red pre-applied stickers.
Installation: on base plates.
Optional: can be concreted directly into ground.

INDUSTRIAL SAFETY BARRIERS – HOOP BARRIERS ø 50 mm

Modular hoop barrier with options to adapt to all types of needs. Ideal for industrial and warehouse safety and protection. 

Length: 1250 mm.
Height: 1000 mm.
Steel tube: ø 50 mm.
Finish: phosphate primed and painted RAL 1021 and black adhesive sticker kit included. Standard model: single hoop.
Installation: on base plates.
Options: reinforcement bar and protective panel.

INDUSTRIAL SAFETY BARRIERS: U-SHAPED PROTECTION GUARD & POST

Ideal for industrial environments and warehouse safety.

Height: 1000 mm.
Material: steel tube, ø 50 mm.
Finish: phosphate primed and painted RAL 1021 and black adhesive sticker kit included.
Installation: on base plates. 

ANGLED CORNER INDUSTRIAL SAFETY BARRIER – ON BASE PLATE

Protects building corners or machines from accidental vehicle damage.
Two dimensions: L580 x W580 x H430 mm or L800 x W800 x H1000 mm.
Steel tube: ø 60 mm, 2 mm thick.
Finish: galvanised steel or galvanised and painted RAL 1021 with black pre-applied bands.
Installation: on base plates or concreted directly into ground. 

HIGH IMPACT CORNER  SAFETY BARRIER – ON BASE PLATE

Perfect for protecting corners, sensitive equipment or shelving. The 3rd leg provides increased safety and visibility.
Dimensions: L600 x W600 mm.
Two heights: 600 or 1200 mm.
Steel tube: ø 76 mm, 3 mm thick. Finish: zinc primed and painted in RAL 1021 and black pre-applied stickers.
Installation: on base plates. 

RACKING IMPACT GUARD:

Install indoors to protect racking or sensitive machinery from forklift collisions. Its height and eye-catching markings improve visibility and prevent damage to fixed structures.

Dimensions: L160 mm x W160 mm.
Three heights: 400, 800 or 1200 mm.
Structure: 6 mm steel sheet (5 mm for the 400 mm height).
Finish: zinc primed and painted in RAL 1021.
Markings: black pre-applied stickers.
Installation: on base plates. 

CRASH PROTECTION BOLLARD

A sturdy solution to protect any type of structure or to identify pedestrian zones.

Three diameters: 90, 114 or 168 mm.
Height: 1000 mm.
Steel tube: 3 mm gauge with a welded dome top.
Finish: galvanised steel or zinc primed and painted RAL 1021 (or our standard RAL colours) with black pre-applied bands.
Installation: on base plate.
Optional: can be concreted directly into ground.

EXTENDING SAFETY BARRIER – BLACK AND YELLOW

Can be quickly extended for immediate use.
Height: 1000 mm.
Extendable: up to 3000 mm.
Posts: ø 25 mm, feet ø 30 mm.
Assembly: with rivets.
Finish: lacquered in yellow and black over raw steel. 

BELT POSTS

Place belt posts as needed to organise queues and control foot traffic in indoor areas. Height: 1000 mm.
Structure: ø 63 mm steel post on marble base with a decorative cover.
Finish: stainless steel or black.
Belt: 2 m long, black.
Top: 3 attachment points for ease of configuration.