HEIGHT RESTRICTORS AND ACCESS GATES

An access control solution for roadways that are too

narrow for a full-width height restrictor.

Access height: from 1.9 to 4 m.

Width: from 2.5 to 6 m.

Structure: steel tubes 120 x 120 mm and 80 x 80 mm.

Equipped with single or double tension cables.

Locking: with stainless steel pins. Pin locked with padlock (included)  or optional 11 mm triangle-key lock.

Finish: lacquered in white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black). Installation: on base plates with stencil and ground hooks

included in the pre-installation kit.

Levelling: with locknuts placed under the base plates.

Optional: height gauge rail.

The centre crossbar slides between the two horizontal bars so that the height restrictor’s width fits the installation location right down to the centimetre. With our adjustable-height version, setting the desired height
is simple We offer a pre-installation kit separate from
the height restrictor itself so that you can prepare your concrete surfaces in advance.
Height above ground: from 2.2 to 4.5 m.
Structure: steel tubes, 80 x 80 mm or 120 x 120 mm.
Finish: lacquered in white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black). Installation: on base plates with stencil and ground hooks included in the pre-installation kit.
Optional: height gauge rail.

This telescopic car parking access barrier adjusts to all road widths, from 3 to 4.75 metres. We offer a pre-installation kit separate from the barrier itself so that you can prepare your concrete surfaces in advance. 

Structure: steel tubes, 70 x 40 mm and 60 x 30 mm.
Width: adjustable from 3000 to 4750 mm, locked with screws.
Locking: with padlock (included). Second post included for locking in open position.
Finish: lacquered white over galvanised steel with red reflective strips (contact us for other colour options such as yellow and black). Installation: on base plates with mounting brackets (included). 

Perfect for filtering vehicle traffic. The telescopic barrier adjusts to all road widths (from 3.05 to 6.40 m) – right down to the centimetre. 

Structure: 80 x 80 mm aluminium bar extended with 70 x 70 mm aluminium bar.
Width: adjusts from 3200 to 6500 mm (distance between the axis of rotation and the end of the barrier) for a post-to-post width of 3050 to 6400 mm.
Opening system: rotation on stainless-steel axis on ball bearings. Counterweight must be integrated into a box attached to one end of the bar.
Locking: in raised position (on main post) or lowered position (on tip support post) with pin and padlock, included. Delivered with tip support post (steel).
Finish: painted white with red reflective strips (contact us for other colour options such as yellow and black).
Installation: on base plates with mounting hardware included. 

The gas cylinder system allows easy opening and closing to your car parking without any protruding counterweight, it can be positioned close to a wall. In addition, the pendulum support arm grips the ground and ensures stability. 

Structure: 80 x 80 mm aluminium tube extended by a 70 x 70 mm aluminium tube.
Width: adjusts from 3000 to 4000 mm (distance between axis of rotation and the tip of the barrier).
Operating mechanism: integrated gas cylinder to compensate the weight of the boom and facilitate its use. Rotation on a stainless-steel axel. Automatic locking.
Locking options: key padlock or triangle key padlock . Height adjustable pendulum support arm (+/-100 mm).
Finish: lacquered white steel with red reflective strips. Pendulum support arm finished in RAL 3020.
Installation: on base plates with stencil and ground hooks included. 

A car parking access-control barrier available in 2000 mm and 2300 mm versions. This latest model is equipped with a vertical tube to which a sign can be attached. 

Two lengths: 2000 or 2300 mm.
Passage width: 1600 or 2150 mm.
Structure: steel tube, ø 60 mm.
Opening system: pivot-mounted shaft.
Locking: with ø 20 mm pin and padlock (included). Can be locked at 90° in open position.
Finish: galvanised steel or paint over galvanised steel in our colours.
Installation: on 200 x 200 mm base plate with concreted anchor rods (included).

Structure: ø 60 mm steel tube with black plug.
Length: 1800 mm.
Opening system: pivots in outer tube.
Locking: with ø 16 mm pin and padlock (included). Can be locked at 90° in open position.
Finish: galvanised steel or paint over galvanised steel in our colours
Installation: on base plates with reinforcing gussets. Anchor rods included for concreting in to the ground. 

 A decorative access control barrier that works well on its own or in conjunction with the Jersey decorative railing. An effective and aesthetically pleasing way to help manage traffic flows.

Length: 2010 mm.
Structure: steel tube 50 x 50 mm and 30 x 30 mm.
Opening system: pivot-mounted shaft.
Locking: with ø 20 mm pin and padlock (included). Can be locked at 90° in open position.
Locking options: 11 mm triangle key or 14 mm captive triangle key. Finish: galvanised and painted in our RAL colours (see page 10). Installation: on 200 x 200 mm base plate with concreted anchor rods (included).