Icoms Detection TMA-3B3 Pedsestrian and bicycle counter
Pedestrian and cycling counter installed near Bamber Bridge, Lancashire.

The Icoms Detections TMA-3B3 Portable Bicycle counters use Radar / LIDOR to collect and report bicycle counts and speed data on bicycle paths, and lanes. The non intrusive technology can be mounted on existing street furniture. Data is then sent to the IDASO Ltd cloud.   The portable bicycle counter can be deployed on a temporary basis, or a more permanent solution can be delivered if required. The installation takes about half an hour, and setup is completed with a laptop to calibrate the TMA-3B3.

This particular site was installed in October 2019 and tests have shown that the voltage has never dropped below 12v proving that the battery and solar panal are up the job. The data is collected every half hour and a report can be viewed on the IDASO hosted platform or the data can be exported as a CSV file to be used in a 3rd party system.

We have also developed a low cost cover to hide the radar / LIDOR unit which can be used in areas prone to vandalism.

TMA-3B3 pedestrian and bicycle counter installed with a solar panal
Pedestrian and bicycle counter

Further information can be found at https://ct-technologyinfo.com/radar-road-traffic-counters-classifiers/ or for the data hosting look at the IDASO website https://www.idaso.ie/core-login

Compare a Radar Traffic Counter to an Inductive Loop Counter